ST-00100

From ProdDocs
Jump to: navigation, search

SimplyTronics Educational Robot Full Kit

Contents

Overview

The ST-00100 ST Educational Robot Full Kit includes a microcontroller compatible with the Arduino Uno. It has the body and components compatible with other robots platforms released by Parallax. If you are looking for the robotics kit without rechargeable battery circuits, please go to this link ST-00104

Assembly and programming instructions for this robot kit can be found in this link: http://learn.parallax.com/ShieldRobot

ST00100Top.jpg

THIS EDUCATIONAL ROBOTICS KIT CONTAINS ALL THE MATERIALS NEEDED FOR ASSEMBLING A WORKING ROBOT.

Material included

  • ST Educational Board (ST EDU - ST-00101)
  • USB cable (ST-00049)
  • 2 Parallax Continuous Rotation Servos (ST-00100-900-00008)
  • Educational Robot Component Kit (ST-00102)
  • 2 Robot Wheel and Tire kits (ST-00100-28114)
  • ST Screwdriver (ST-00083)
  • Tail wheel
  • Robot Chassis
  • Hardware Pack (contains all the screws and hardware needed to assemble the robot)

Batteries not included. You will need two 18650-size rechargeable batteries for operating this robot (button top recommended).

If you want to use this robot with standard AA batteries, we would recommend using a different robot kit: ST-00104.

Assembly required.

Product Features of the Included ST EDU board

  • Microcontroller: Arduino UNO compatible
  • 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, 6 servo/sensor ports and a reset button
  • USB connector for programming or charging the batteries
  • Holds two rechargeable/replaceable 3.7 volt Li-ion 18650-size cells, and the batteries can be charged from a 7.0-9.0v AC-to-DC adapter or a 5v USB port (without taking them out of the board)
  • Multiple LEDs provide power indicators, communication indicator, charge readiness information and low battery indicator
  • Over-current charge protection prevents harm to batteries
  • Breadboard and power/signal headers for handy prototyping area
  • 3-position power switch for powering the headers only or powering header + X9 port
  • Jumper for power selection of X9 header: regulated (5V) or unregulated (Vin)
  • High current output capabilities for robotics applications (up to 1 Amp at 5 Volts)

Resources and downloads

Assembly and programming instructions for this robot kit can be found in this link: http://learn.parallax.com/ShieldRobot